AZUD LUXON MFH
Azud Industrial Filtration
Automatic hydraulic screen filters suitable for all applications, available in a wide range of micron sizes, all with the same high quality guarantee of AZUD.
Max. flow: 564 m³/h (2483 gpm).
The consumption of water in the flushing cycle is minimal.
Wide selection of screens
From 80 to 1.000 micron.
From 4″ to 12″.
Tempertures to 60ºC.
Large screen area
Up to 12.000 cm2.
The screen is manufactured in high quality stainless steel.
The filtration process and the flushing cycle occur simultaneously.
The filters are delivered to be installed.
Raw water enters from the inlet manifold to the coarse screen,trapping larger particles that could interfere with the filtercleaning mechanism -in vertical models, large and heavyparticles are separated by gravity.
Then water flows IN-OUT through the weave wire screen, trapping in the inner screen surface bigger particles than the filtration degree. Clean waterflows out through the outlet manifold . Particles build-up createsa filter cake that increases the pressure differential between inletand outlet, and this activates the cleaning cycle when the pre-setpoint is reached.
Clean water supply is not interrupted when the cleaning cycle isactivated. The cleaning phase starts with the opening of the drainvalve, that creates a pressure gradient between the pressurizedinner filter and the atmosphere. At the same time, the suctionnozzle scanner spirals along the complete inner surface of the screen.
As a result of the pressure difference, a high velocity SuctionEffect is created at the inlet of the nozzles, making the waterflows OUT- IN through the filter element and vacuuming all theparticles retained on the screen surface.